A MTP® Elite Female breakout cable for parallel to parallel or parallel to duplex connections. 8 Fibers, OM3 50/125μm, Plenum (OFNP). Each leg is labeled and length matched in the factory for a clean installation.

Standard lengths are 1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft), 30m (98ft) and 40m (131ft). Because we are the manufacturer, any other length between or beyond these steps can be produced on request, with your choice of jacket color, labeling and packaging.

Product Highlights

• MTP® Elite Female (Non-Pinned) to MTP® Elite Female (Non-Pinned), 8 Fibers
• OM3 50/125μm, bend insensitive fiber
• Insertion loss ≤0.35dB (0.15dB Typ.), return loss ≥45dB
• Type B polarity
• 3.0mm Plenum (OFNP) round cable
• Minimum bend radius 7.5mm
• Ten standard lengths from 1m (3ft) to 40m (131ft), custom lengths built to order

This breakout is used wherever one multi-fiber interface must serve several devices. The 8-fiber version matches 400G and 800G parallel interfaces that run on 4 or 8 lanes, such as QSFP112, OSFP and twin-port OSFP connections. The factory controlled fan-out keeps each leg at the right length and polarity, avoiding the tangle of separate patch cords.

Each breakout leg is individually jacketed, labeled and measured, and the transition from trunk to legs is protected against pulling forces. If your installation needs different leg lengths or a different lane mapping, we can build it to your drawing.

Please reference 8FMTPOM3 in your enquiry. The 1m (3ft) version is the standard model; Our sales team can also advise on polarity, gender and jacket choices if your project documentation is not final yet.

Every MPO/MTP assembly leaving our factory is 100% tested for insertion loss and return loss, with end face geometry checks on the multi-fiber ferrules. Controlled polishing keeps the loss budget stable across the whole batch, which matters when several mated pairs sit in one link.

Our engineering team handles custom MPO/MTP assemblies daily. If the standard configuration does not match your link design, send us the requirement and we will build exactly what your network needs at factory-direct cost.

Products are packed in anti-static or PE bags with connector dust caps fitted, then boxed in sturdy export cartons. Custom labels, barcodes and carton markings are available on request.