For UAE project teams, the key is to match this exact configuration to the port schedule, optical budget and delivery documentation. The custom MMC-16 trunk is an OS2 backbone unit built around MMC connectors based on sixteen-fiber sub-units. Fiber capacity may scale from 16 to 384 fibers, with cable outside diameter from 4.0 to 17.5mm depending on the chosen build. G.657.A1 glass, APC polish and an OFNP jacket offer the foundation for project-specific single-mode distribution.

Product Highlights

• MMC to MMC, 16-384 Fibers
• OS2 9/125μm, G.657.A1
• MMC insertion loss ≤0.35dB, return loss ≥60dB
• Trunk/ Extender Polarity wiring scheme
• 4.0-17.5mm Plenum (OFNP) cable
• Length and fiber count manufactured to the project requirement

Specifications

Engineering the fiber count and cable structure

A trunk is not merely a longer jumper. As fiber count increases, sub-unit arrangement, cable diameter, pulling strength and breakout protection become part of the design. This MMC-16 series supports trunk or extender polarity and 200–400N long-term tensile ratings, with 660–1320N short-term ratings across the build range. The precise figures relevant to an order should be confirmed on its production diagram.

Backbone routes and panel coordination

Typical uses provide links between optical distribution frames, hardware rows and high-density MMC panels. Pre-termination enables numerous fibers to be existing in one pull and tested before arrival. The panel plan ought to specify each sub-unit, connector polarity and gender transition so this trunk lands correctly. High fiber counts additionally require sufficient rear cable management and static bend space.

Specifying a made-to-project trunk

There is no assumed stock length for this custom product. State the path length in feet or meters, overall fiber count, MMC connector gender, polarity, breakout lengths, jacket needs and identification. Pulling eyes or other deployment protection may be discussed where the pathway requires them. Length, diameter and tensile build are confirmed jointly rather than chosen separately.

Ordering and Factory Support

Use XXMMCSMF as the MMC-16 trunk series reference and attach a fiber plan or diagram. A practical inquiry includes fiber count, sub-unit map, connector gender, polarity, deployment conditions and length, allowing the factory to reference the proper engineered unit. Our UAE project support can review the requirement with Shenzhen production before a formal quotation is issued.