For UAE project teams, the key is to match this exact configuration to the port schedule, optical budget and delivery documentation. This custom fiber patch cable is built to the precise setup the project specifies: connector styles, polish, fiber mode, jacket and length are all chosen at order time and this assembly is factory terminated and optically tested before dispatch.

Product Highlights

• Bend Insensitive Fiber with 7.5mm Min. Bend Radius
• Precision Zirconia Ferrule Connectors Ensure Low Loss
• Available in LC, SC, FC, and ST ULL Connectors with 0.08dB Typ. IL
• Available in 0.9mm, 2.0mm, and 3.0mm Cable Diameters
• Available in Riser (OFNR), LSZH, and Plenum (OFNP) Cable Jackets

Specifications

Built to the order

The custom program covers the combinations that stock lists cannot: mixed connector families, non-standard jackets, unusual lengths, identification and packing to the project specification. This assembly is terminated and tested exactly like a stock product, with the setup confirmed prior to production.

Multimode reach for the data hall

This OM4 unit serves the short-reach fabric of the data center: 10G and 25G server uplinks, 40G and 100G SR4 spine links and the inter-row runs between them. On OM4 glass, 10G Ethernet holds to 400 meters and 100G SR4 to 100 meters, which covers the overwhelming majority of in-hall routes with margin to spare.

Why OM4 replaced OM3 in new builds

OM4 raises the effective modal bandwidth to 4700 MHz·km at 850nm, and that headroom translates directly into reach for the higher-speed interfaces. The price difference against OM3 has largely disappeared, so new cabling plants standardize on OM4 and keep OM3 only for matching installed installations.

Length Options

Standard length options cover the common patching routes: 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 30m (98ft), with custom length offered beyond the list. Specifying the measured path length keeps the slack out of the manager and the strain off these connectors.

Quality Control and Testing

Each assembly is terminated with precision zirconia ferrule connectors and optically tested before packing: insertion loss and return loss are verified on every cable, and end-face geometry is inspected for consistent physical contact. This cable ships with dust caps on the two connectors and the test result offered on specify.

Ordering and Factory Support

Refer to this setup by connector pair, fiber mode and length when ordering a quotation. For configurations outside the listed options, mixed connector families, jackets, identification or project packing, send the need with the inquiry and the factory will verify the build prior to production. Our UAE project support can review the requirement with Shenzhen production before a formal quotation is issued.