For UAE project teams, the key is to match this exact configuration to the port schedule, optical budget and delivery documentation. This OM5 fiber patch cable carries a LC UPC interface on one end and a LC UPC interface on the other, factory terminated on OM5 glass and optically tested as an entire unit. The duplex zipcord build keeps the transmit and receive strands paired in one unit for fast, error-free patching.

Product Highlights

• Bend Insensitive Fiber with 7.5mm Min. Bend Radius
• Precision Zirconia Ferrule Connectors Ensure Low Loss
• Flame-Retardant Riser (OFNR) for Vertical and Floor-to-Floor Installations
• Color-Coded Cable Jacket for Easy Identification
• Duplex Zipcord Construction Reduces Risk of Damage from Crimping

Specifications

Where OM5 makes sense today

The natural home of OM5 is the 40G and 100G SWDM4 interface and the newer 400G SR4.2 specification. For operators planning those interfaces, OM5 patching future-proofs the plant without changing connector practice. For UAE procurement, record this requirement with the project documents so the supplied configuration can be checked on arrival.

OM5 and wideband multimode

OM5 extends the multimode idea into the wideband range: beside 850nm, the fiber carries wavelengths up to 953nm, which lets SWDM optics put four lanes on a single duplex pair. A connection that would need eight fibers on OM4 runs on two with OM5 and the right optics, which changes the fiber count arithmetic of a whole row.

Length Options

Standard length options cover the common patching routes: 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), with custom length offered beyond the list. Specifying the measured path length keeps the slack out of the manager and the strain off these connectors.

Quality Control and Testing

Each assembly is terminated with precision zirconia ferrule connectors and optically tested before packing: insertion loss and return loss are verified on every cable, and end-face geometry is inspected for consistent physical contact. This cable ships with dust caps on the two connectors and the test result offered on specify.

Ordering and Factory Support

Refer to this setup by connector pair, fiber mode and length when ordering a quotation. For configurations outside the listed options, mixed connector families, jackets, identification or project packing, send the need with the inquiry and the factory will verify the build prior to production. Our UAE project support can review the requirement with Shenzhen production before a formal quotation is issued.