LC UPC to LC UPC Duplex OS2 OFNR 24F Indoor Breakout Cable

For UAE project teams, the key is to match this exact configuration to the port schedule, optical budget and delivery documentation. This pre-terminated breakout cable delivers an entire 24-fiber indoor connection in one factory-built unit: an OS2 single-mode trunk on a riser (OFNR) jacket opens into duplex LC UPC legs at every end, each leg optically tested before packing. It replaces a full day of field termination with a single plug-in deployment.

Product Highlights

• Riser (OFNR) Flame-retardant Jacket
• Precision Zirconia Ferrule Connectors Ensure Low Loss
• Duplex Clip Prevents the Fiber from Rotating and Maintains the Polarity
• G.657.A1 Bend Insensitive Fiber & 10mm Min. Bend Radius
• Optical Testing Ensures Network Performance

Specifications

Bend-insensitive glass in real pathways

Backbone routes turn through tight tray corners, congested risers and crowded vertical channels. The G.657.A1 bend-insensitive fiber in the assembly tolerates a 10mm fiber bend radius, so a hurried routing decision during a night servicing window does not turn into a measurable penalty on the connection. The glass remains fully compatible with the G.652.D plant it connects to.

Single-mode trunks for building and campus backbones

A pre-terminated OS2 trunk carries the links that leave the room: riser spans between floors, campus backbones between buildings and each wavelength-multiplexed service in between. The glass is the identical group used in the outside plant, so this assembly does not become the weak point of the optical budget. At 1310 and 1550nm the attenuation stays a fraction of a decibel per kilometer, and every factory-polished connector adds less than 0.3dB when the end faces are clean and seated.

A complete 24-fiber link in one assembly

Twenty-four fibers is the practical size for a row feed or a floor distribution connection: sufficient lanes for a full panel with spares, still light sufficient for two technicians to path without mechanical help. Factory termination means each one of the 48 connector end faces is polished, inspected and tested before this cable ships, a level of consistency that field termination on a ladder rarely reaches.

Duplex legs for duplex optics

The legs are built as duplex pairs because the optics they serve are duplex: transmit and receive travel jointly from trunk to port. Polarity is fixed at the factory and verified before packing, so the installer dresses every pair into its port without a second thought about crossover.

Riser jacket for the vertical route

The riser (OFNR) jacket is the rating that lets the assembly run vertically between floors without a conduit of its own. The tight-buffered build inside keeps every fiber individually protected, so this trunk tolerates the handling of a riser pull and the dressing inside the floor distributor. For routes that leave the riser-rated pathway, the custom versions of this series carry LSZH and plenum options.

From row feed to floor distribution

The natural homes of a 24-fiber duplex-leg trunk are the feeds that terminate as ports: a row of twelve duplex server or switch links, a floor distributor feeding twelve work-region outlets, or a building entrance splitter shelf. In every case the arithmetic is the identical - one pull, one dressing operation, twelve tested duplex links - and the alternative is twelve distinct patch cords with twelve times the pathway fill and twelve times the identification effort.

Planning a trunk route

A multi-fiber trunk is planned once and existing once, so the planning deserves the hour it takes. Measure the path through the actual containment, note the bend space at the two ends, and decide which end gets pulled. State the pulling eye need with the order if the path is long or congested. At the far end, leave the dressing slack this panel or cassette needs - the datasheet breakout lengths are the default, and other geometries are confirmed prior to production.

Fiber Count Options

This build is built with 24 Fibers per trunk, terminated and tested as an entire unit.

Length Options and Customization

Standard length options cover the common routes: 2m (7ft), 10m (33ft), with custom length offered beyond the list, including foot-based builds for projects specified in imperial units. Specifying the measured path length keeps the slack out of the tray and the strain off these connectors.

Quality Control and Testing

Each trunk is terminated with precision zirconia ferrule connectors and optically tested leg by leg before packing: insertion loss and return loss are verified on every fiber, and end-face geometry is inspected for consistent physical contact. This assembly ships with dust caps on each connector and the test results offered on specify.

Ordering and Factory Support

Refer to this setup by fiber mode, fiber count, connector pair, breakout geometry and length when ordering a quotation. For configurations outside the listed options - mixed connector families, jacket ratings, pulling eye, identification or project packing - send the need with the inquiry and the factory will verify the build prior to production. Our UAE project support can review the requirement with Shenzhen production before a formal quotation is issued.