400G OSFP PCxxx Passive DAC

For short reach 400Gbps links in 400G Ethernet data center and cloud network environments, the 400G OSFP PCxxx Passive DAC offers a factory terminated passive dac assembly with OSFP (IHS/Finned Top) to OSFP (IHS/Finned Top) connectors and a length of 1m (3ft)~3m (10ft). As a passive cable it draws essentially no power and adds no latency to the link. The cable meets OSFP MSA, IEEE 802.3cd 100GBase-CR2, CMIS 4.0.

Product Highlights

• OSFP (IHS/Finned Top) to OSFP (IHS/Finned Top)
• Data rate: 400Gbps
• Cable type: Passive DAC
• Length: 1m (3ft)~3m (10ft)
• Operating temperature: 0 to 70°C (32 to 158°F)

In 400G Ethernet data center and cloud network environments, the 400G OSFP PCxxx Passive DAC provides a factory terminated 400Gbps link between OSFP (IHS/Finned Top) to OSFP (IHS/Finned Top) ports. This unit is supplied at 1m (3ft)~3m (10ft). It installs directly into standard ports with no separate transceivers or patch cords to manage at either end. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request.

Standards compliance covers OSFP MSA, IEEE 802.3cd 100GBase-CR2, CMIS 4.0. The unit works in any equipment with a standard OSFP (IHS/Finned Top) to OSFP (IHS/Finned Top) interface; if your network uses a specific vendor's coding, tell us the switch model and we will program and verify it before delivery.

This model is supplied at 1m (3ft)~3m (10ft) under part number OSFP-400G-PCxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 28~30AWG.

Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.

Our warehouse keeps fast-moving transceivers and cables ready for same-week dispatch. Courier, air freight and sea freight options are all available depending on your budget and schedule, and we consolidate multiple items into one shipment whenever it saves you cost.

We do not ship untested stock. Each transceiver and cable is powered up in our test racks, checked for link stability, transmit power, receiver sensitivity and diagnostic readouts, and only then packed for delivery. This factory-level testing is one reason network integrators keep reordering from us year after year.

Each unit is sealed in an anti-static bag, cushioned in a blister tray and boxed in an export-grade carton. Outer cartons carry handling marks and can be palletized for air or sea freight. If your project requires retail boxes, barcodes or your own brand on the label, we can arrange that as well.