800G OSFP IHS/Finned Top to 2 x 400G OSFP RHS/Flat Top Passive Copper Breakout DAC Cable

The 800G OSFP IHS/Finned Top to 2 x 400G OSFP RHS/Flat Top Passive Copper Breakout DAC Cable provides an 800Gbps copper connection between OSFP (IHS/Finned Top) to 2x OSFP (RHS/Flat Top) ports with a cable length of 0.5~3m (2~10ft). As a passive cable it draws essentially no power and adds no latency to the link. Direct attach copper keeps both latency and power consumption to a minimum, which makes it the economical choice for 800G Ethernet data center and cloud network environments.

Product Highlights

• OSFP (IHS/Finned Top) to 2x OSFP (RHS/Flat Top)
• Data rate: 800Gbps
• Cable type: Passive Breakout DAC
• Length: 0.5~3m (2~10ft)
• Operating temperature: 0 to 70°C (32 to 158°F)

In 800G Ethernet data center and cloud network environments, the 800G OSFP IHS/Finned Top to 2 x 400G OSFP RHS/Flat Top Passive Copper Breakout DAC Cable provides a factory terminated 800Gbps link between OSFP (IHS/Finned Top) to 2x OSFP (RHS/Flat Top) ports. This unit is supplied at 0.5~3m (2~10ft). By fanning one port out to 2x OSFP (RHS/Flat Top), it doubles or quadruples the number of endpoints served per switch port and keeps the cabling plant simple. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment.

This product is designed and tested to comply with OSFP MSA Rev5.0, IEEE 802.3ck, CMIS 4.0. It plugs into any standards-based OSFP (IHS/Finned Top) to 2x OSFP (RHS/Flat Top) port, and compatibility coding for specific switch or router brands can be done in our factory before shipment.

This model is supplied at 0.5~3m (2~10ft) under part number OSFP-800G-2OFLPCxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 26~30AWG.

Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.

We ship to customers around the world every week. Express couriers handle most orders door to door in a few days; larger consignments go by air or sea to keep freight costs down. Tracking information is provided for every shipment, and we are flexible on shipping accounts and forwarders.

Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.

Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.