200G QSFP56 to 4 x 50G SFP56 Passive Copper Breakout DAC Cable

For short reach 200Gbps links in 200G Ethernet data center and cloud network environments, the 200G QSFP56 to 4 x 50G SFP56 Passive Copper Breakout DAC Cable offers a factory terminated passive breakout dac assembly with QSFP56 to 4x SFP56 connectors and a length of 0.5m (2ft)~3m (10ft). As a passive cable it draws essentially no power and adds no latency to the link. The cable meets SFF-8661, SFF-8432, IEEE 802.3bs-200GAUI-4, IEEE802.3cd-50GAUI-1, SFP-8636, SFF-8472.

Product Highlights

• QSFP56 to 4x SFP56
• Data rate: 200Gbps
• Cable type: Passive Breakout DAC
• Length: 0.5m (2ft)~3m (10ft)
• DDM/DOM: Not Supported

Designed for 200G Ethernet data center and cloud network environments, the 200G QSFP56 to 4 x 50G SFP56 Passive Copper Breakout DAC Cable carries 200Gbps between QSFP56 to 4x SFP56 interfaces. This unit is supplied at 0.5m (2ft)~3m (10ft). One port becomes 4x SFP56, a common pattern for connecting newer aggregation ports to an installed base of lower speed equipment. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment.

Compliance: SFF-8661, SFF-8432, IEEE 802.3bs-200GAUI-4, IEEE802.3cd-50GAUI-1, SFP-8636, SFF-8472. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.

This model is supplied at 0.5m (2ft)~3m (10ft) under part number QSFP-200G-4SPCxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 26~30AWG.

Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.

Our warehouse keeps fast-moving transceivers and cables ready for same-week dispatch. Courier, air freight and sea freight options are all available depending on your budget and schedule, and we consolidate multiple items into one shipment whenever it saves you cost.

We do not ship untested stock. Each transceiver and cable is powered up in our test racks, checked for link stability, transmit power, receiver sensitivity and diagnostic readouts, and only then packed for delivery. This factory-level testing is one reason network integrators keep reordering from us year after year.

Products are first packed into blister trays or self-sealed bags and then into cartons. Standard labels and marks are applied by default, and customized packing and labeling are available on request.