For UAE project teams, the key is to match this exact configuration to the port schedule, optical budget and delivery documentation. This custom MMC-24 trunk uses 24-fiber MMC sub-units to create OS2 backbone assemblies from 24 to 576 fibers. Depending on setup, this cable outside diameter ranges from 4.0 to 18.0mm. APC interfaces, G.657.A1 bend-insensitive glass and plenum jacketing suit high-capacity single-mode links where deployment time and panel density are key design constraints.

Product Highlights

• MMC to MMC, 24-576 Fibers
• OS2 9/125μm, G.657.A1
• MMC insertion loss ≤0.35dB, return loss ≥60dB
• Trunk/ Extender Polarity wiring scheme
• 4.0-18.0mm Plenum (OFNP) cable
• Length and fiber count manufactured to the project requirement

Specifications

When a 24-fiber sub-unit is appropriate

MMC-24 build concentrates more fibers into every multi-fiber location than MMC-16, which may reduce the number of sub-units in a large backbone. It additionally changes the fiber mapping at each termination. The connected panels and hardware patch cords must be intended for the identical 24-fiber organization; otherwise a 24-fiber trunk cannot be made compatible simply by changing a label or adapter.

Mechanical planning for high-capacity routes

Across the customizable range, long-term tensile strength is 200–400N and short-term strength is 660–1320N, but the relevant build is determined by fiber count. A 576-fiber path needs distinct handling from a 24-fiber cord. Plan tray fill, pulling access, reel handling and the 20/10D dynamic/static bend needs before selecting the final cable design.

A configuration built from the project drawing

No fixed standard length is assigned to this trunk. Orders are built to the necessary meter or foot length and may use trunk or extender polarity. Offer the number of 24-fiber sub-units, connector gender, fan-out dimensions and identification scheme. The 4.0–18.0mm diameter range and fiber-count maximum are series boundaries, not a promise that each combination has the identical build.

Ordering and Factory Support

Reference XXMMCSMF for the MMC-24 trunk series and provide the necessary length, overall fiber count and port mapping. Our staff may then verify diameter, sub-unit arrangement, pulling needs and identifiers before manufacturing the backbone. Our UAE project support can review the requirement with Shenzhen production before a formal quotation is issued.