For UAE project teams, the key is to match this exact configuration to the port schedule, optical budget and delivery documentation. This one-push cleaner is intended for MMC-12 and MMC-24 connector end faces, covering UPC, APC and PC polish types. The disposable push-style tool advances dry cleaning material with every operation and is rated for at least 525 uses. It supports routine ferrule servicing for multi-fiber panels, cable assemblies and test setups without liquid cleaner or replacement cartridges.

Product Highlights

• Cleaner Brand: US Conec IBC™
• Style: Push Style Port Cleaner
• Connector Type: MMC-12/24
• Polish Type: PC/UPC/APC
• Number of times: ≥ 525 times
• Use Type: Disposable

Specifications

One tool for MMC-12 and MMC-24 interfaces

This cleaner addresses the specified MMC-12/24 connector formats, not the MMC-16 model covered by the distinct tool. Verify this connector version before use, especially in a panel containing multiple MMC variants. Appropriate cleaning removes dust and light contamination that may raise insertion loss or damage ferrules when connectors are mated under pressure.

Cleaning before inspection and mating

Align this cleaner squarely with the port or connector and entire one firm push cycle. Then examine the end face rather than assuming it is clean. If contamination remains, observe the active equipment-compatible cleaning process and avoid improvising with unapproved swabs or solvents. Clean the mating connector as well, or debris may transfer back to the first ferrule.

Maintaining a reliable field tool

Keep the cap fitted during storage and replace the disposable unit after its rated uses. Do not disassemble the advance mechanism or use this tool on live optical interfaces. Installers ought to disable sources, examine with a suitable microscope and dust-cap clean connectors until they are ready to be mated.

Ordering and Factory Support

Use part number 25802 for the MMC-12/24 cleaner and state unit count. If your toolkit additionally services MMC-16 connectors, provide the distinct MMC-16 cleaner in the order and label the two tools for quick identification. Our UAE project support can review the requirement with Shenzhen production before a formal quotation is issued.