For UAE project teams, the key is to match this exact configuration to the port schedule, optical budget and delivery documentation. This duplex armored patch cable joins an LC UPC pair on one end to an SC UPC pair on the other, on OS2 9/125µm single-mode fiber inside a helical stainless steel tube with a low smoke zero halogen jacket. It is the single-cord answer when modern LC-equipped hardware has to land on a SC-terminated plant inside a building zone where LSZH cabling is specified. For UAE procurement, record this requirement with the project documents so the supplied configuration can be checked on arrival.

Product Highlights

• LC UPC to SC UPC hybrid duplex, OS2 9/125µm single mode
• LSZH jacket: low smoke, zero halogen in a fire
• Helical stainless steel armor against crush, impact and rodents
• G.657.A1 bend-insensitive fiber, 10/5D bend radius
• Insertion loss ≤0.3dB, return loss ≥50dB
• Stock lengths 1m to 30m; custom lengths and jackets on request

Specifications

Mixed LC and SC interfaces in one tested cord

A hybrid duplex cord removes this adapter pair that would otherwise sit between the active equipment and the frame: LC on the transceiver side, SC on this panel side, the two terminated and tested as one unit. Each adapter eliminated is a mated pair and its loss removed from the link, and one less part to stock, clean and eventually troubleshoot.

Where LSZH is specified

Tunnels, stations, airports, hospitals, ships and high-occupancy office towers routinely forbid halogenated cable jackets because of the smoke and corrosive gas they emit in a fire. This cord meets those specifications while keeping the armored build, so the safety case and the mechanical case are the two satisfied by the identical part number.

Steel armor under a low-smoke jacket

Public-region pathways see more abuse than hardware rooms: cleaning hardware, luggage, servicing work and constant foot traffic. The helical stainless tube inside the LSZH jacket absorbs that abuse without conduit, and at 3.0mm the cord still routes through standard managers and surface raceway.

Upgrading mixed-interface plants safely

Buildings that grew over decades commonly present SC on the riser side and LC on the new hardware side. A hybrid armored LSZH cord makes that transition connection by connection, with no adapter inventory and no change to the fixed plant. Because as the plant gradually re-terminates toward LC, the identical series supplies the LC-LC LSZH model, the jacket policy and the protection level stay constant through the migration.

Length options and customization

Standard length options are stocked for fast delivery: 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft) and 30m (98ft), covering the common rack-to-rack, access and frame connections this cord is built for. Made-to-order lengths beyond this range are manufactured to order. Surveyed public-region routes should be ordered at the measured length so no surplus cable accumulates in the evacuation pathway or raceway. Specifying the precise path length avoids the two the slack storage problem of an overlong cord and the strain risk of one that is too short.

Quality control and testing

Every hybrid unit is terminated with precision zirconia ferrules on the two interfaces and measured for insertion loss and return loss before packing; the 0.3dB and 50dB figures are verified per cord. Ferrule geometry is checked on the two polish ends, and the LSZH compound is batch-verified against the jacket specification.

Ordering and Factory Support

Refer to the LC-SC OS2 LSZH armored series when ordering a quotation, stating the path length and referencing the LSZH need. An LC to SC APC version exists in the identical jacket setup, and other connector mixes are offered through the custom armored program. Our UAE project support can review the requirement with Shenzhen production before a formal quotation is issued.