For UAE project teams, the key is to match this exact configuration to the port schedule, optical budget and delivery documentation. The APC-to-APC model of the 24FMMCMTPOM4 breakout carries 24 OM4 fibers from one MMC APC female connector to three MTP-8 APC Elite female legs. All interface points use APC polish, and this fan-out follows factory harness polarity. It offers three eight-fiber multimode routes in one compact, factory-built unit.

Product Highlights

• MMC Female to MTP® Female, 24 Fibers
• OM4 50/125μm, bend-insensitive fiber
• MMC insertion loss ≤0.35dB, return loss ≥40/45dB (MMC/MTP®)
• Harness Polarity wiring scheme
• 2.5mm Plenum (OFNP) cable
• Standard length options: 1m (3ft), 2m (7ft), 3m (10ft)

Specifications

A three-way fan-out with uniform polish

The cable is suitable when the two the MMC infrastructure and all three MTP destinations are intended for APC. These connectors are female and non-pinned, so pinned mates are necessary throughout. confirm that the application truly calls for three eight-fiber branches and that no extra polarity reversal is introduced by the connected trunk or cassette before installation.

Loss values for the complete optical path

This assembly is rated at 0.35dB maximum insertion loss, with at least 40dB return loss at MMC and 45dB at MTP APC. Use these connector-specific figures when reviewing the passive connection. OM4 behavior at 850/1300nm supports multimode systems, but allowable distance and overall interface count remain properties of the entire transceiver link.

Installing and identifying three APC branches

Standard length options are 1m (3ft), 2m (7ft) and 3m (10ft), with made-to-order lengths in feet or meters. Because three comparable MTP connectors leave one fan-out, branch identifiers are especially valuable. Preserve gentle routing around the breakout body, examine each ferrule and cap any branch that is not connected immediately.

Ordering and Factory Support

State 24FMMCMTPOM4 in the APC-to-APC three-leg setup, with length and unit count. If the three branches terminate in distinct rack locations, offer the necessary leg arrangement and identification rather than relying on a general-purpose fan-out diagram. Our UAE project support can review the requirement with Shenzhen production before a formal quotation is issued.