For UAE project teams, the key is to match this exact configuration to the port schedule, optical budget and delivery documentation. The 24FMMCMTPSMF breakout converts one 24-fiber MMC APC female interface into three MTP-8 APC female interfaces over OS2 G.657.A1 fiber. It is a single-mode, three-way fan-out for high-density parallel cabling. Factory harness polarity defines the relationship between the MMC ferrule and all three eight-fiber branches, eliminating field termination and reducing cabling ambiguity. For UAE procurement, record this requirement with the project documents so the supplied configuration can be checked on arrival.

Product Highlights

• MMC Female to MTP® Female, 24 Fibers
• OS2 9/125μm, G.657.A1
• MMC insertion loss ≤0.35dB, return loss ≥60dB
• Harness Polarity wiring scheme
• 2.5mm Plenum (OFNP) cable
• Standard length options: 1m (3ft), 2m (7ft), 3m (10ft)

Specifications

Three independent eight-fiber paths

Every MTP-8 leg represents one third of the 24-fiber MMC interface. This makes this assembly suitable for hardware and panel layouts that intentionally divide a 24-fiber parallel interface into three groups. It is not a general-purpose one-to-three splitter for arbitrary duplex links. Verify the port mapping, pinned mating interfaces and APC polish before assigning the branches.

Single-mode testing and documentation

Maximum insertion loss is 0.35dB and minimum return loss is 60dB. Acceptance records ought to specify the MMC side and every MTP branch so all three optical routes remain traceable once installed. OS2 attenuation figures are provided at 1310nm and 1550nm, but the end-to-end channel loss still includes adapters, trunks and connectors beyond this breakout.

Managing a three-leg fan-out

Select 1m (3ft), 2m (7ft) or 3m (10ft) standard versions, or specify a different length in feet or meters. A three-branch unit needs more space at this fan-out than a straight jumper. Support the breakout body, avoid crossing the legs under tension and maintain the 10mm minimum optical-fiber bend radius at each turn.

Ordering and Factory Support

Reference the three-leg OS2 model of 24FMMCMTPSMF with the necessary length and unit count. Supply branch numbering and any special leg-length needs so the delivered cable may be labeled consistently with your port records. Our UAE project support can review the requirement with Shenzhen production before a formal quotation is issued.