This MTP® Elite Female/Male harness fans one multi-fiber connector out to duplex LC legs, replacing a cassette and patch cords with a single factory tested assembly. OS2 9/125μm fiber, Customized MTP-12 Harness, 8-144F, OS2, Plenum (OFNP)/LSZH jacket.

Available lengths are 1m (3ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.

Product Highlights

• MTP® Elite Female/Male to LC/SC/FC/ST,
• OS2 9/125μm, G.657.A1
• Insertion loss ≤0.35dB, return loss ≥60dB
• Type A/Type B polarity
• Plenum (OFNP)/LSZH
• Minimum bend radius 10mm
• Stock lengths from 1m (3ft) to 30m (98ft), custom lengths on request

Install this harness between an MPO trunk or panel and LC based transceivers. The labeled duplex legs make it easy to land each pair on the correct port.

The harness replaces a cassette with a direct optical path from the MPO connector to each LC pair. This removes two mated connections from the channel, improving both loss budget and reliability. Custom leg lengths and labels are available on request.

Please reference XXMTPXXSMF in your enquiry. Our sales team can also advise on polarity, gender and jacket choices if your project documentation is not final yet.

We have manufactured fiber optic assemblies since 1995. MPO and MTP cabling is one of our core lines: fiber counts from 8 to 144, single mode and multimode, UPC and APC polish, trunk, jumper, harness and breakout formats. Send your drawing and we turn it into a ready to install assembly.

Our test routine covers insertion loss, return loss and ferrule end face inspection on every assembly. Because testing is done in-house, custom variants receive exactly the same verification as standard models.

Each assembly is coiled, capped and sealed in an individual bag, then packed into foam lined export cartons. Test reports can be attached per unit or per batch, and carton marks follow your shipping instructions.