For UAE project teams, the key is to match this exact configuration to the port schedule, optical budget and delivery documentation. This simplex armored patch cable runs one OS2 9/125µm single-mode fiber between two SC UPC connectors, wrapped in a helical stainless steel tube under the blue 3.0mm riser-rated (OFCR) jacket. It suits the long tail of hardware that still speaks SC UPC: media converters, legacy ODFs, industrial switches and test sets that now sit at the exposed edge of the network.

Product Highlights

• SC UPC to SC UPC simplex, OS2 9/125µm single mode
• Helical stainless steel armor against crush, impact and rodents
• G.657.A1 bend-insensitive fiber, 10/5D bend radius
• Riser (OFCR) flame rating for vertical building pathways
• Insertion loss ≤0.3dB, return loss ≥50dB
• Stock lengths 1m to 30m; custom lengths and jackets on request

Specifications

Simplex SC for BiDi optics and single-fiber links

Bidirectional transceivers put the two directions on one strand, and a simplex SC cord is the natural patching format for them. The identical build serves WDM monitor ports, optical taps and any connection where only one fiber is lit. Patching with a single-fiber cord keeps the unused side of the frame free and makes the strand easy to trace months later.

Where SC UPC remains the standard

Media converters, older carrier CPE, industrial Ethernet switches and much existing ODF hardware still present SC UPC ports. The push-pull SC body is tolerant of frequent handling and easy to clean and examine, which keeps it in service long after LC took over the transceiver side. This cord lets that plant stay exactly as documented while gaining armored protection.

Armor under the floor and behind the wall

Simplex tails frequently disappear into places nobody inspects again: beneath raised floors, behind wall boxes, along baseboards in retrofit offices. Those are precisely the routes where unarmored patch cords get crushed or chewed. Because the helical steel tube inside this cord carries the mechanical rating, the pathway needs no conduit and the connection survives the life of the building.

Media converters and industrial links

A large share of simplex SC UPC demand comes from media converters and industrial Ethernet gear linking control rooms to field cabinets. These links run for years in cabinets that get opened monthly, so the cord is handled far more than a data-center jumper. The armored build and the 1000-cycle ferrule rating are aimed at exactly that service pattern, and the stock lengths cover the usual cabinet-to-frame distances. For UAE procurement, record this requirement with the project documents so the supplied configuration can be checked on arrival.

Length options and customization

Standard length options are stocked for fast delivery: 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft) and 30m (98ft), covering the common rack-to-rack, access and frame connections this cord is built for. Made-to-order lengths beyond this range are manufactured to order. Because simplex tails are frequently dressed into tight enclosures, ordering the measured length avoids the coil of slack that otherwise ends up trapped behind this panel. Specifying the precise path length avoids the two the slack storage problem of an overlong cord and the strain risk of one that is too short.

Quality control and testing

Each cord is terminated with precision zirconia ferrule SC connectors and verified for insertion loss and return loss before packing; the 0.3dB and 50dB figures are tested figures on every unit. End-face geometry is inspected for consistent physical contact, and the ferrules are rated for up to one thousand mating cycles.

Ordering and Factory Support

Refer to the SC UPC simplex armored series when ordering a quotation, stating the path length and jacket rating. Other connector mixes and polish types, including hybrid builds, are handled through the custom simplex armored program once the factory confirms the specification. Our UAE project support can review the requirement with Shenzhen production before a formal quotation is issued.